Product details
First, scope of application:
SWC-I type universal coupling is mainly applicable to paper making equipment, general machinery, water pump equipment and test bench and other types of general machinery occasions.
Coupling two different axis of the transmission shaft system. Its flange diameter of 58-225mm, the transmission of rated torque range of 150-22,000N.m, the axis of the folding angle of 25 ° -35 °.
Universal coupling should be selected according to the load characteristics, calculated torque, bearing life and working speed.
Second, the structure characteristics:
1、Universal coupling utilizes the characteristics of its mechanism, so that the two axes are not in the same axis, and the existence of axial angle can realize the continuous rotation of the two axes coupled and reliably transfer the torque and motion.
2, lightweight universal coupling is characterized by: its structure has a large angular compensation ability, small moment of inertia, simple disassembly, low maintenance and other advantages.
Third, selection and maintenance:
We provide one-stop service for lightweight universal shaft selection, universal shaft parameter design and development and universal shaft production, etc.
Universal shaft manufacturer direct supply, so that you save time, effort and worry. At the same time to provide SWC-I lightweight universal coupling transportation and storage, installation and use, maintenance and repair of technical guidance.
Weicheng universal shaft SWC-I light universal shaft parameter table Weicheng universal shaft SWC-I light universal shaft parameter table Weicheng universal shaft SWC-I light universal shaft parameter table Weicheng universal shaft SWC-I light universal shaft parameter table
Note: 1. The meaning of each code in the above table is as follows:
L — standard length, for the retractable type, the length L is the minimum length in the shortened state;
Lv – elongation;
m–Mass;
Tn – nominal torque (take 50% of the yielding torque);
Tf–Fatigue torque, i.e. the permissible torque determined by fatigue strength under variable bending load;
β – the maximum axis folding angle;
mL – the mass of the growth of 100mm.
- The above table does not specify the unit of measurement according to millimeters;
- When users need to change the standard length, expansion and flange type size, please set with our manufacturer.