We all know, no matter what type of universal shaft, after a long time of use, there will inevitably be a series of big or small problems.
If this is ignored, the accumulation of time, will certainly bring some unnecessary trouble to the production work, affecting the production.
Therefore, in order to ensure the use of universal axis in the process of normal operation, and can effectively extend its service life, we must be on the universal axis to carry out some maintenance work.
Today, We universal shaft manufacturers will share with you how to do a good job from the four steps to the maintenance of the universal shaft.
The first step, the use of cardan shaft, first of all, pay attention to slow speed, only in the use of the process of slowly accelerating more in line with the use of machinery, in order to reduce unnecessary wear and tear of mechanical equipment.
The second step is to check the balance of the universal coupling.
Because the balance welding piece is one of the important reasons to stabilize the balance of the universal shaft, so this is a very critical step.
And the issue of the relationship of the original assembly is something we need to be more careful about when we make major repairs.
The third step, the working condition of the cardan shaft must be checked every day, so as to ensure that the cardan shaft can work normally.
The fourth step, add grease. Generally speaking, in summer, it is best to inject lithium-based grease, and in winter, it is also necessary to inject lithium-based grease.
But the only difference is that the number of lithium grease is different in these two seasons.
So, if you want the machinery to run stably, do not affect the production work, usually in addition to the maintenance of mechanical equipment, the maintenance of the universal axis is also essential. These you have done ?
